Routing & middleware

Nucleus has two routing surfaces, and application code should almost always use the first:

• pkg/nucleus — the module-facing layer. This is the recommended entry point, and what your module's Routes function receives.
• pkg/router — the lower-level implementation. You need it only to integrate a third-party HTTP handler, or when building an application directly with pkg/app.

Defining routes (module layer — pkg/nucleus)

Inside a Module[C].Routes callback, the nucleus.Router interface is the only surface you should use. It does not expose any pkg/router types, so modules do not take a hard dependency on the router implementation.

var articlesModule = nucleus.Module[struct{}]{
    Name:   "articles",
    Prefix: "/api/articles",
    Routes: func(r nucleus.Router, _ struct{}) {
        r.Get("/",     listArticles)
        r.Post("/",    createArticle)
        r.Get("/{id}", showArticle)
        r.Put("/{id}", updateArticle)
        r.Delete("/{id}", deleteArticle)
    },
}

nucleus.Router supports three coexisting styles:

• Flat declarative — r.Get("/path", handler) for simple or audit-sensitive modules.
• REST resource — r.Resource("/path", controller, nucleus.Methods(...)) for CRUD modules. Only the requested verbs are registered; reflection is not used.
• Nested groups — r.Group("/prefix", func(g nucleus.Router) { ... }) for areas with nested URL hierarchy. Middleware added inside the callback is scoped to the group.

Routes: func(r nucleus.Router, _ struct{}) {
    r.Group("/admin", func(g nucleus.Router) {
        g.Get("/stats", adminStats)
        g.Get("/users", listUsers)
    })
},

Middleware type: func(http.Handler) http.Handler — standard net/http middleware. No framework-specific wrapper type is needed.

Per-route middleware (Router.With)

Router.With(mw ...Middleware) Router returns a new Router whose middleware applies only to routes registered on it. Routes registered directly on the parent r are not affected — this is the per-route counterpart to the module-level Module.Middleware field, which wraps every route in the module.

// Guard a single route without affecting sibling routes.
// enforcer is *authz.Enforcer captured from OnStart.
Routes: func(r nucleus.Router, _ struct{}) {
    r.Get("/products", listProducts)                              // no auth
    r.With(enforcer.RequireRole("admin")).Get("/billing", billing) // admin only
},

With composes additively: chained or nested calls layer middleware outer-to-inner. Any func(http.Handler) http.Handler value works directly — Enforcer.RequireRole, router.CSRFMiddleware, or a hand-written guard — with no adapter needed.

Lower-level routing (pkg/router)

pkg/router is used directly only in two cases:

1. You are assembling an app with pkg/app (not pkg/nucleus).
2. You need to mount an arbitrary http.Handler via a.Router.Mount(prefix, handler).

In the pkg/app context, a.Router is a *router.Router and handlers receive *router.Context:

// pkg/app-level wiring (not module code)
a.Router.Get("/api/articles", listArticles)
a.Router.Post("/api/articles", createArticle)

a.Router.Mux.Route("/admin/api", func(sub *router.Mux) {
    sub.Use(adminAuthMiddleware)
    sub.Get("/stats", adminStats)
})

router.Handler is func(*router.Context) error; errors bubble up to the recovery / logging middleware.

Router.Mount(prefix, handler) mounts an arbitrary http.Handler — useful for embedding third-party handlers or a second app.

The Context type

Handlers receive a *router.Context — or, in fluent mode, a *nucleus.Context that wraps it. The context exposes:

• Request / ResponseWriter
• path parameters via c.Param("id")
• query string helpers (c.Query, c.QueryInt, …)
• body binding (c.BindJSON, c.BindXML, c.BindForm)
• response helpers (c.JSON, c.XML, c.String, c.Status)
• the request-scoped context.Context
• the resolved request scope (site, tenant) when multi-site is on

Body binding

The three binders differ in one important way — whether they validate:

Binder	Accepts	Runs validate tags
c.BindJSON	JSON	Yes — returns a *DomainError on failure
c.BindForm	application/x-www-form-urlencoded, multipart/form-data	Yes
c.BindXML	XML	No

c.BindForm decodes into a struct pointer and performs typed conversion before validating. Its rules:

• Field resolution order — a form:"name" tag wins, then json:"name", then the case-insensitive field name. form:"-" skips a field.
• Supported types — string, bool (an HTML checkbox value of "on" binds as true), signed and unsigned integers, floats, time.Time (RFC 3339, 2006-01-02T15:04, or 2006-01-02), and pointers to any of those.
• Embedded exported structs are flattened.
• Present-but-empty values leave the field at its zero value, and unknown keys are ignored.

Built-in middleware

The default middleware chain (full-stack mode) installs:

Middleware	Purpose
Recovery	Recovers from panics, logs with stack trace.
Request ID	Generates / propagates an X-Request-ID.
Structured logging	Emits one slog line per request with timing.
OpenTelemetry	Wraps the handler in an OTel span (when enabled).
CORS	Configured from cors_origins / cors_allow_credentials; empty cors_origins denies cross-origin (v1.0.0 default).
CSRF	Opt-in — off by default. Set csrf_enabled: true to mount it on the default stack, or mount router.CSRFMiddleware(opts) / router.WithCSRF per module.
Rate limiting	Configured from rate_limit_* keys.
Request scope	Resolves multi-site / multi-tenant context.

Every auto-mounted middleware can be turned off from configuration, and none of them rely on hidden state. CSRF is the exception in the other direction: it is off by default and you turn it on, either with csrf_enabled: true or per module (see Auth & sessions for the module-scoped pattern).

The order of the auto-mounted middleware is fixed. Handlers can rely on the request already carrying a logger, a request ID and a span by the time they run.

Custom middleware

func auditMiddleware(next router.Handler) router.Handler {
    return router.Handler(func(c *router.Context) error {
        start := time.Now()
        err := next(c)
        slog.InfoContext(c.Request.Context(),
            "audit",
            "method", c.Request.Method,
            "path",   c.Request.URL.Path,
            "took",   time.Since(start),
        )
        return err
    })
}

r.Use(auditMiddleware)

router.Handler is a thin wrapper over http.Handler that returns an error. Errors bubble up to the recovery / logging middleware where they are translated into a JSON or HTML response according to the request Accept header.

Interceptors declared in configuration

r.Use and a module's Middleware field both need the person assembling the application to write the code, in the right place, in the right order. That is fine for middleware you wrote for your own app, and no use at all for middleware somebody wants to distribute: it cannot be shipped as a package, only pasted into a bootstrap.

An interceptor is a package that registers itself, exactly like a storage provider or an authentication backend:

package audit

import "github.com/jcsvwinston/nucleus/pkg/router/interceptor"

func init() {
    interceptor.Register("audit", New)
}

func New(cfg interceptor.Config) (interceptor.Interceptor, error) {
    var settings struct {
        Sink string `koanf:"sink"`
    }
    if err := cfg.Bind(&settings); err != nil {
        return nil, err
    }
    return func(next http.Handler) http.Handler {
        return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
            // ...
            next.ServeHTTP(w, r)
        })
    }, nil
}

The application imports it for the side effect and the operator places it:

import _ "example.com/audit"

http_interceptors: [audit, tenant-guard]
interceptors:
  audit:
    sink: stdout
  tenant-guard:
    header: X-Tenant

The list is ordered and the order is the behaviour. First is outermost: it sees the request first and the response last. Authentication before rate limiting and rate limiting before authentication are different systems, so an interceptor is not merely switched on here, it is placed — the same way auth_backends places a backend. Settings live under interceptors.<name>.*, mirroring how auth_backends pairs with auth.<name>.*.

A name nobody registered fails at boot, naming what is registered, and so does a factory that cannot configure itself. A typo in a list of request interceptors must not resolve to one fewer protection, quietly.

Interceptors are mounted inside the framework's own middleware — after the request ID, the session and the observability hook. An interceptor that displaced those would break everything downstream, including its own logging. The order among interceptors is yours; the order relative to the framework is not.

Server-rendered templates

app.New loads every .html under templates_dir (default internal/web/templates) recursively at startup and wires the engine into the router, so handlers render with the template variant of HTML:

// In a module handler (nucleus.Context): the engine-backed render lives on
// the embedded router context — nucleus.Context.HTML(code, raw) writes a
// raw string instead.
return c.Context.HTML(http.StatusOK, "fieldservice/index.html", data)

Naming rule: each file registers under its path relative to templates_dir, with forward slashes. So internal/web/templates/fieldservice/index.html registers as "fieldservice/index.html".

Two consequences: files at the root keep their flat name ("base.html"), and {{define "name"}} blocks register under their declared names as always. This is the same layout nucleus startapp scaffolds, and the scaffolded page route renders through it.

The startup log reports templates loaded with the directory and the count. A configured directory that exists but contains no .html logs a WARN, so a misconfigured path is visible rather than surfacing later as "template engine is not configured" on every render.

Template functions and prebuilt bases

Presentation logic belongs in templates. app.WithTemplateFuncs registers a template.FuncMap available to every template the loader parses, and app.WithTemplates injects a prebuilt *template.Template as the base the directory parses into (its templates and {{define}} blocks stay available). Order at startup: registered functions → recursive parse of templates_dir → the engine is wired into the router.

a, err := app.New(cfg, app.WithTemplateFuncs(template.FuncMap{
    "fecha": func(t time.Time) string { return t.Format("02/01/2006") },
}))

The fluent builder exposes the same options directly: nucleus.New().WithTemplateFuncs(...) and .WithTemplates(...). Every public application option has a builder counterpart, and a parity test enforces it.

Embedded template sources (WithTemplatesFS and Module.Templates)

app.WithTemplatesFS(prefix, fsys) parses every .html file of an fs.FS — typically an embed.FS — into the engine under <prefix>/<path> names. Unlike WithTemplates it accumulates: each call adds a source. Load order fixes the collision rule: the WithTemplates base first, then every FS source, then templates_dir — so the host's on-disk files always override an embedded source's.

A module usually does not call it directly: declaring Module.Templates registers the module's embedded templates automatically under the module's name, and a handler renders them with c.Context.HTML(status, "<module-name>/<path>", data):

//go:embed templates/*.html
var templatesDir embed.FS

func Module() nucleus.ModuleSpec {
    templates, _ := fs.Sub(templatesDir, "templates")
    return nucleus.Module[struct{}]{
        Name:      "shop",
        Templates: templates, // renders as "shop/index.html", …
        Routes: func(r nucleus.Router, _ struct{}) {
            r.Get("/shop", func(c *nucleus.Context) error {
                return c.Context.HTML(http.StatusOK, "shop/index.html", nil)
            })
        },
    }.Build()
}

Mounting an OpenAPI document

The runtime ships an explicit OpenAPI mount: openapi.Handler turns a document provider — a func() *openapi.Document — into an http.Handler, and the application mounts it where it wants it.

import "github.com/jcsvwinston/nucleus/pkg/openapi"

if err := a.MountOpenAPIHandler("/api/openapi.json", openapi.Handler(func() *openapi.Document { return myDoc })); err != nil {
	log.Fatal(err)
}

There is no auto-generation of the document from handler reflection — that path was deliberately not taken. The contract you ship is the one you wrote.